SCM GROUP CANADA, SCM Minimax SC 4 Elite Sliding Table Saw 8 Foot Table

Qty	Item #	Job Name
Amount	Product	PO Number
Amount	Product	PO Number
Amount	Product	PO Number
Amount	Product	PO Number
Amount	Product	PO Number
Amount	Product	PO Number
Amount	Product	PO Number
Amount	Product	PO Number
Amount	Product	PO Number
Amount	Product	PO Number
View moreView less

Product details

Manufacturer SCM Group
Part Number SCM.SC4.ES
Manufacturer's Part SC4
Weight 1,220.000 lbs
Sold in Multiples of 1
Priced By Each
Alias Part Number SCM.SC4.ES
Preorder N

Product Type

Elite Saw

Description

CM Minimax SC4 Elite Sliding Table Saw

SC4 Elite Circular table saw with tilting blade with professional performances, for a quality without compromises. The Elite series has proven itself in American cabinet shops for many years. This machine boasts a full 8.5’ stroke, and features normally found on much more expensive machines, for a fraction of the cost.

ADVANTAGES:

Stabilidy and rigidity: The new saw unit closed loop structure is made of a heavy cast iron and is supported firmly under the table by two lateral supports in a crescent shape. These solutions give strength and rigidity, guaranteeing perfect cutting results. The saw unit can be equipped, on request, with scoring blade for perfect cutting even on veneered panels. The scoring blade is an optional available in two versions: with belt transmission from the main motor and with an independent motor 0.75 HP (0.55 kW). The maximum diameter allowed for the main saw is 315 mm with scoring blade mounted.

Precise and silent: Optimal support also to larger pieces, with the sliding table 360 mm wide. Exceptional precision and smoothness: to secure the guides it is not used glue, since the thickness could affect sliding. They are secured with a procedure of aluminum riveting.

The large square frame: Panel loading is easy on the large squaring frame with an idle roller at the end. The telescopic squaring fence with two reversible stops can be used to square panels measuring 3200 x 3200 mm and for miter cuts at up to 45° on both sides of the frame.

High-tech devices: The support of the fence can also be equipped with a digital readout with the sensor running on a magnetic band.

Main Features:

Solid cast iron saw unit with double support trunions
8.5’ sliding table
Aluminum sliding table and rail with hardened steel guide-ways
Belt-driven scoring blade off main motor (with external setup)
European-style rip fence with cam lock, micro-adjustable
Additional angular cutting device included with telescopic fence and 2 flip over stops
Idle roller to facilitate panel loading and unloading
Round steel guide bar for rip fence
2-position sliding table lock
Table extension on saw out-feed
Scoring blade (Adjusted Independently of Main Blade)
Dado blade compatible – includes dado throat plate
4.8 HP main motor
Accepts 10” or 12” main blade, 5/8 arbor
Electrical requirements: 230 volt, single phase, 24 amps
Machine weight: 1390 lbs
Required footprint: 129” x 188”
“CSA”-rated electrical components, including cables
Made in Italy

Technical Specifications:

Sliding Table Size: 11.4” x 106”
Fixed Table Size: 33” x 22”
Table Height: 35”
Blades tilting: 90° ÷ 45°
Max Cutting with Rip Fence: 50”
Max. saw blade diameter with scoring blade installed: 12"
Max. saw blade projection from table at 90°/45°: 100mm/71mm
Sliding Table Stroke with Scoring: 106”
Main blade arbor size: 5/8”
Scoring blade diameter/arbor size: 100mm/20mm
Main blade speed: 4,000 rpm
Scoring blade speed: 8,000 rpm
Electrical and Dust Extraction Requirements:
- Single-phase: 24 amps, 230v, 10 AWG CU THHN wire
- Dust outlet diameter, main port: 4 3/4”
- Dust outlet diameter, overhead blade guard: 2.5”
- Dust extraction volume: 1,000cfm
One-phase 4.8hp Standard motor power starting from: 4 (4,8) kW - 50 (60) Hz

Options:
5.5' sliding table available.
6.6hp three-phase, 230v motor (Special Order)

About SCM Group North America
The SCM Group North America offers distribution in Ontario, Canada for the largest ranges of the best industrial woodworking machinery available in the industry. Whether you are small shop or a large corporation, build kitchen cabinets or architectural millwork, we focus on your individual production requirements to make sure we provide the best solution possible. We are experts in complete and integrated manufacturing facilities as well as individual machines like CNC Wood Routers, CNC Machining Centers, Edgebanding Machines, Panel Saws, Bore and Dowel Machines, Wide Belt Sanders plus an array of single and multi-purpose machines.

The Premium division Minimax offers professional machines, sturdy, compact and user-friendly. Minimax machines easily work any type of wood or its derivatives and guarantee lasting top quality and reliability. From universal combined machines to single-function machines, minimax offers a huge range of products designed to prioritise safety and to protect less expert operators.

Additional freight charges may apply to heavy or oversize items. Your shipping options could include local delivery, customer pickup, or we may quote freight delivery services to locations out of our shipping area. Shipping fees are based on the destination, size and weigh

Manufacturer:	SCM Group
Part Number:	SCM.SC4.ES MPN: SC4