Edge Pulls and Modern Cabinet Pulls | Slab-Front Cabinetry

Edge Pulls and Modern Cabinet Pulls for Slab-Front Cabinet Builds

Slab-front cabinet builds run on hardware that disappears into the door face. The shift to handle-light or fully integrated cabinet design has pushed edge pulls and modern low-profile pulls into the spec on contemporary kitchens, casework, and architectural millwork. The McFadden's catalog covers the edge pull profiles and modern slim-line pull families that cabinet makers and commercial woodworkers reach for when a slab door has to read as a clean surface, with finish and center-to-center sizing options that hold up across multi-unit production runs.

Everything You Need, All in One Place

From plywood and fasteners to finishing supplies and shipping materials, we stock a full range of cabinetry essentials. One supplier, one delivery – less time sourcing, more time building.

Trusted by the Trade for 50+ Years

With decades of experience, we understand what it takes to keep shops running smoothly, and we back that up with expert support and consistent supply.

Built for Cabinetry Pros

We don't just carry product, we know how it's used. Our team speaks your language, with deep knowledge across cabinetry, millwork, and finishing applications.

Decorative Cabinet Hardware

Handles and Pulls

Handles and Pulls
Knobs

Knobs
Hooks

Hooks
Wall and Switchplates

Wall and Switchplates

Looking for Something Else?

If you didn't find exactly what you're after, drop us a quick note and we'll help you track it down.

With thousands of materials, hardware lines, and custom-order options in stock, not everything fits neatly on a single category page. If you're looking for a specific item – like a certain drawer slide, hinge system, or finish option – just let us know.

Our team works closely with cabinetry professionals every day, and we're happy to help you track down the right solution fast. Whether it's in stock, special order, or part of a bundled system, we'll make sure you get what you need, without the runaround.

McFadden's Logo
View All Products Contact Us

Why McFadden's

Slab-front hardware that arrives in spec, every order

Edge pulls and modern slim-profile hardware fail a slab-front build when the finishes drift between orders or center-to-center sizing varies batch-to-batch. The McFadden's catalog carries the cabinet hardware lines that cabinet shops and millwork firms order against repeatable specs, with consistent finish runs and consolidated invoicing through a single trade account. Regular, dependable delivery across Canada means a multi-unit build doesn't stall when the next phase needs another lot of the same pull.

Brand and product range

Edge pulls and modern profiles in the McFadden's catalog

The slab-front pull range pulls from a few core profile families in the McFadden's catalog. The Edge Pulls Collection covers the integrated grip profile that mounts flush to the door edge, available in finishes sized for typical drawer and door builds. The Amerock contemporary lines, including Versa, Mulholland, and Calathea, sit alongside the McFaddens Preferred Modern Pulls run for casework builds that want the slab-front read without committing fully to edge-only hardware. Brand depth across Amerock and Liberty Hardware in this profile range matters when a designer specifies a particular finish and the cabinet shop needs that finish in cataloged sizes for a phased build.

Explore the Collection
Product spec breakdown

Profiles, sizing, and mounting for slab-front pulls

Edge pulls mount at the top or side edge of a slab door, drilled through from the face with a single fastener or surface-mounted with two depending on the profile. The integrated grip depth runs in the shallow range characteristic of slab hardware, with overall pull lengths cataloged in the standard center-to-center patterns used across cabinet builds. Modern Pull profiles sit between an edge pull and a traditional bar pull: the body is slimmer than a bar but mounted with the same two-screw center-to-center pattern, which lets a shop swap profile without rebuilding the drilling jig. Finishes available across both categories include matte black, brushed nickel, satin chrome, polished chrome, and the warm metals (champagne bronze, oil rubbed bronze) for shops working a more traditional slab front.

Explore the Collection
Buying considerations

What to spec when ordering pulls for a slab-front build

The first call on a slab-front build is whether the hardware reads as visible (a slim Modern Pull, a low-profile bar) or recedes into the door edge entirely. That choice locks the drilling pattern and the door height clearance, and sets the path for the rest of the cabinet build. Finish discipline matters next. A designer's matte-black kitchen spec only holds if the matte black ordered in batch one matches the matte black ordered in batch four, which is why finish-consistent lines from Amerock and similar trade-grade producers earn the place over chasing a marginal cost difference on a comparable sku. Center-to-center sizing closes the spec: commercial casework and high-volume residential builds benefit from sticking with one or two cc sizes across the build so the same drill template carries through, and the McFadden's catalog filters narrow the slab-front pull options by cc when the spec is set.

Explore the Collection

Built on Trust. Backed by Experience.

For decades, McFadden's has been a reliable partner to shops and teams across North America. Our customers count on us for consistent quality, expert service, and materials that show up when and where they're needed. Don't just take our word for it – hear what real professionals have to say about working with McFadden's.

"I needed some really hard to find product information and Bruce Earl went way out of his way to help me getting what I need. His help was very much appreciated."

Khalil Saade

"Truly one of my favourite suppliers, customer service is always on their game and everyone working for the company is willing to help in any way possible. I've never had a problem they couldn't quickly solve. Great company!"

Micaela St. Cyr

"Good work!"

Brian Love

"I ordered a spice rack online. Shipping was fast. Arrived in excellent shape, great price too! Thanks!!"

Tim Rabak

Common questions about slab-front cabinet pulls

Cabinet shops and design firms most often work through the same set of questions when speccing slab-front hardware for kitchen, casework, and commercial millwork builds. The answers below cover finish selection, sizing patterns, and how the McFadden's catalog handles the spec-to-order handoff.

An edge pull mounts to the top, side, or bottom edge of the door, with the grip recessed into the edge profile so the pull reads as a continuation of the door rather than a visible piece of hardware. A modern cabinet pull is surface-mounted to the door face but designed slim and low-profile, so the pull is visible but doesn't dominate the door. Edge pulls work best on slab doors at standard cabinet heights; modern pulls give a slab-front read while letting the designer specify a contrasting finish.

The McFadden's catalog covers slab-front pulls in matte black, brushed nickel, satin chrome, polished chrome, champagne bronze, oil rubbed bronze, and stainless finishes, with finish consistency held across the contemporary product lines so multi-batch orders match. Specific finish availability by profile is filterable in the Decorative Cabinet Hardware listings once a trade account is logged in.

Center-to-center (cc) refers to the spacing between the two mounting holes on a pull, measured in millimeters. Standard cc sizes on McFadden's slab-front pulls cover the common 96mm to 192mm range used in residential cabinet builds, with longer sizes available for appliance pulls and commercial casework. Sticking to one or two cc sizes across a cabinet build lets the same drilling template carry through every drawer face and door, which is why production shops standardize cc patterns early in the spec.

Yes. The McFadden's catalog organizes hardware by finish family so the same matte black, champagne bronze, or satin chrome can run across pulls, knobs, hooks, and backplates from the same trade-grade producer. The Amerock catalog in particular keeps finish names consistent across its profile families, which is useful when a designer specs a single finish for the whole kitchen and the cabinet shop needs all four hardware types in that finish.

Lock the finish, the profile, and the center-to-center size in phase one and order the same line for every subsequent phase. Edge pull and Modern Pull lines from established producers are designed to hold finish and sizing consistency across long production runs, which is the central spec discipline for multi-unit residential and commercial casework. Where a single line runs short on a particular finish, the McFadden's catalog cross-references comparable cc and finish matches across the broader Decorative Cabinet Hardware range, with availability accessible through the customer trade account.